Standardsignatur
Titel
Form factor and volume equations for individual trees of Shorea robusta in Western low land of Nepal
Verfasser
Thakur Subedi
Shes Kanta Bhandari
Madhav Pandey
Yajna Prasad Timilsina
Srdjan Stojnić
Dipak Mahatara
Seiten
143– 166
Material
Artikel aus einer Zeitschrift
Datensatznummer
200209024
Quelle
Austrian Journal of Forest Science 2021, 138(3): ONLINE ONLY ; Jrg. 138 ; 3 (2021) , 143– 166
Abstract
Keywords: DBH, form factor, models, Shorea robusta, volume prediction
Schlüsselbegriffe: DBH, Formfaktor, Modelle, Shorea robusta, Volumenvorhersage
Precise and accurate prediction of tree volume is important to quantify growing stock and to support decision making for sustainable forest management. This study was carried out to estimate the form factor and to develop volume prediction models of Shorea robusta. We selected 48 sample trees from the Western low land of Nepal through purposive sampling. The diameters at 0.3 m, 0.8 m, 1.3 m and 1.8 m above the ground level were measured before felling the trees. After felling the diameters were measured at 2.8 m, 4 m, 6 m above the ground level and continue up to the tip of the tree at the interval of 2 m. We also measured the length of each section between two consecutive diameter measurement point and total height. We estimated breast height and absolute form factors, and calculated the arithmetic mean and variation of the form factors. We developed a model that can predict under bark diameter from over bark diameter and diameter at breast height (DBH) from stump diameter. Similarly, we developed models to predict stem volume using a different combination of predictor variables (DBH and/or height). The breast height form factor was 0.43 and absolute form factor was 0.40. The linear model fitted best to describe the under bark to over bark relation and DBH to stump diameter relation. Simple power function (R2=0.95) best fitted to our volume data. The product of squared DBH and height (R2=0.96) performed as the best predictor for volume prediction. Our form factor and volume model significantly differed with the previously developed form factor and models of Shorea robusta. Thus, we recommend developing site-specific
form factors and volume models of Shorea robusta across the country. The models developed in this study are expected to contribute to predicting volume, biomass and carbon and thus contribute to sustainable forest management and may contribute to the calculation of the national carbon budget.
Eine präzise und genaue Schätzung des Stammvolumens ist wichtig für die Berechnung des Bestandszuwachses, um damit die nachhaltige Waldbewirtschaftung zu unterstützen. Diese Studie wurde mit dem Ziel durchgeführt, den Formfaktor abzuschätzen und Modelle zur Berechnung des Holzvolumens von Shorea robusta zu entwickeln. Wir wählten 48 Probebäume aus dem westlichen Tiefland von Nepal durch gezielte Stichproben aus. Die Durchmesser in 0,3 m, 0,8 m, 1,3 m und 1,8 m Höhe über dem Boden wurden am stehenden Baum gemessen. Nach der Fällung wurden die Durchmesser in 2,8 m, 4 m, 6 m über dem Boden und ab 6 m bis zur Spitze des Baumes im Abstand von 2 m gemessen. Bei geschätzter Brusthöhe und absoluten Formfaktoren berechneten wir das arithmetische Mittel und die Variation der Formfaktoren. Wir entwickelten ein Modell, welches den Durchmesser ohne Rinde aus dem Durchmesser mit Rinde und den Brusthöhendurchmesser (DBH) aus dem Stubbendurchmesser vorhersagen kann. In ähnlicher Weise entwickelten wir Modelle zur Vorhersage des Stammvolumens unter Verwendung einer anderen Kombination von Prädiktorvariablen (DBH und/oder Höhe). Der Formfaktor in Brusthöhe betrug 0,43 und der absolute Formfaktor 0,40. Das lineare Modell passte am besten, um das Verhältnis zwischen ohne Rinde und mit Rinde sowie zwischen DBH und Stubbendurchmesser zu beschreiben. Die einfache Potenzfunktion (R2=0,95) passte am besten zu unseren Volumendaten. Das Produkt aus dem Quadrat von DBH und Höhe (R2=0,96) war der beste Prädiktor für die Volumenvorhersage. Unser Formfaktor- und
Volumenmodell unterschied sich signifikant von den zuvor entwickelten Formfaktor und Volumenmodellen von Shorea robusta. Daher empfehlen wir die Entwicklung von standortspezifischen Formfaktoren und Volumenmodellen für Shorea robusta im ganzen Land. Es wird erwartet, dass die in dieser Studie entwickelten Modelle zur Vorhersage von Volumen, Biomasse und Kohlenstoff beitragen und somit einen Beitrag zur nachhaltigen Waldbewirtschaftung und zur Berechnung des nationalen Kohlenstoffbudgets leisten können.